Noyafa Multi-Function Cable Tester with RJ11/RJ45, PoE, Fiber Optic OPM/VFL, NCV & Cable Length Measurement NF-8508

• Wire mapping & Continuity test: Check Cat5 & Cat6 Cables status. Display length and exact faults like opens, splits, shorts, and crossings on an LCD screen.
• Cable trace: Adjustable signal strength indicator helps find cables from bundled cables, different rooms, walls, and ceilings. (300 meters/984 feet).
• Length test: Measure the length of CAT5/CAT5e/CAT6 cables up to 200 meters (656 feet). Help prepare the suitable cables for installation.
• Port flash: Sending signals through connected cables to flash ports on 10M/100M/1000M hubs, panels, routers, or switches. Sync frequency flashing on Port & LCD Screen.
• PoE test: Diagnose the PoE network by listing pins of the power supply, and other statuses like voltage, polarity, and PSE(af or at standard).
• Optical Power meter: Measure optical power and loss in single-mode optical fibers.
• Visual Fault Locator: Quickly navigate Fiber break points with visible red lights.
• RJ45 Head Test: Tell if RJ45 connectors are properly crimped.
• NCV: Non-contact voltage detector on Receiver levels up safety and reduces chances of damaging devices.

Specifications

• Cable type: CAT5/CAT6
• Voltage protection : 60V
• Details of CONT function : Scan Frequency: 455KHz
• Port Flash: √
• Details of Length function: Accuracy: ≤20M+/-1.6M, 20M~100M+/-2.4M, >100M+/-3.2M
• Details of POE function: Standard/Non Standard – End connection /Middle jumper /Powered by 8 cores – PoE Power supply
• NVL: 10Mw
• OPM: 1310/1550/1625 (Single-mode Wavelength)
• Crimping: RJ45-8 Cores,Min length is 210cm
• Power supply: 3.7V 1500mAh Polymer lithium battery
• Charge : Type-C connector
• NCV: √
• Lamp: √
• Lower voltage warning: √