Noyafa Multi-Function Cable Tester with PoE Detection, Cable Length Measurement, Port Flashing, PING Testing & NCV Function NF-8506

Multi-Function Network Cable Tester

• PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)
• Measure cable length accurately , the range is 200m.
• Two scan modes selectable: AC filter & Non AC filter
• Test physical status for STP, UTP lan cable.
• Hub blink for locating network port by the flashing port light on Hub / Switch.

• Ping test:Check network connectivity
• P Scan:Scan out the IP addresses in use in the switch
• Switch test:Identify the switch type 10M/100M/1000M and the duplex mode of the switch.

• Detect AC voltage presence (50V-1000V).
• Lamp function assists use in dark corners.

Specifications

Transmitter

Wiremap 

• Cable type: CAT5,CAT6 (STP & UTP)
• Test with switch directly: Yes
• Max range: 600m

Scan

• Cable type: CAT5/CAT6 (STP & UTP)/RJ11/other metal wires
• AC filter: Yes
• Max range: 600m

Length

• Cable type: CAT5, CAT6 (STP & UTP)
• Test range: 2~200m
• Breakage location: Yes

POE test

• Test range: DC 5~60V standard / non-standard PoE switch
• Voltage display: Yes
• PSE type: Mid-span/End-span/AT-4 pairs

Switch test

• Link speed: 10M/100M/1000M – Duplex Mode(Full/Half)
• Ping Scan function: Yes
• IP Scan function: Yes
• Battery: 3.7V lithium battery
• Dimensions (LxWxD): 150*75*35mm

Receiver

• Lamp: Yes
• AC Voltage detecting: Yes
• Battery type: 3.7V lithium battery
• Dimensions (LxWxD): 200*50*33mm