HDL Panel SOURCE 10 Touch Screen Dark Purple

• Supporting multiple Source intelligent central control at the same time; master-slave gateway function
• Knob control with rotary use
• Proximity detection: Built-in proximity sensor for detecting human motion. Once the sensor detects near human motion, the touch screen automatically wakes up
• Physical buttons for turning off or enabling the microphone and the display with one touch
• This device must be used with the base, which can be optional with three power interfaces

Specifications

• Power consumption : ≤15W
• Input voltage : Zigbee interface: 100 ~ 240V AC, 50/60Hz; Buspro interface: 18 –
• 28V DC; KNX interface: 21 – 30V DC
• KNX auxilary voltage : 18 – 28V DC
• Output channel : Zigbee / Buspro / KNX interface：2CH，3A/CH; Resistive load:
• ≤660W/CH; Capacitive load: ≤200W/CH
• Communication protocol : HDL LINK, WiFi 2.4G
• Main chip : RK3566
• Storage capacity : 2+16GB
• Operating frenquency : 2.4GHz, 5GHz
• Indoor communication distance (barrierfree) : ≤50m
• Operating system : Android 11
• Ethernet interface : RJ45
• Touch screen : 10-inch capacitive touchscreen, resolution: 1200*2000, with multitouch technology
• Knob : 30 levels of feedback for rotating, clicking and long-pressing;
• Turning the knob to adjust the light, curtains, volume, temperature,
• wind speed, etc.;
• Knob light : RGB light beads
• Microphone : 4 microphones
• Speaker : 1W*2
• Proximity sensor : A maximum sensing distance of 100cm, default: 50cm (can be
• modified in the settings page)
• Light Sensor : Automatically adjusts screen brightness according to light level
• Temperature & humidity sensor : Monitor the temperature and humidity of the environment
• MIC button : Enable/disable microphone
• Power button : Short press to close the display, long press to restart the device
• Type-C interface : For upgrading or temporarily powering panels
• Working temperature : -5℃ ~ 45℃
• Working relative humidity : ≤90%RH, non-condensed
• Storage temperature : -20℃ ~ 60℃
• Storage relative humidity : ≤93%RH
• Dimensions (W X H X D) : 301.3*155.2*9.8mm（Without power interface, see Figure 4）
• Net weight Source 10 : (With bracket，without power interface：1000g)
• Housing material Source 10 ：Metal； Zigbee/Buspro/KNX interface：PC
• Installation : Wall box （up to 2 power interfaces installed）
• IP degree (compliant with EN 60529) : IP20